Another useful tool for the tool box, radius guides. You can press these up against any given curve to measure what the actual radius of the curve is. It's not something you need very often so being able to create a set cheaply like this is rather handy.
Hazels nursery had some very funky mirror tiles on, it inspired me to make some of my own, just simple illustrations but they came out pretty good. It's just 3mm mirror acrylic, they'll be an artwork bundle at the end of the series.
I had another shot at the Market Tray last night and I'm much happier with the result. The original test tray used 4 layers stuck together but it's hard to make sure they're all aligned and misalignment can snag cards when they're tilted. The last market tray avoids this by having the dividers vertically and keyed into the base but it's a bit slow to assemble. I compromised, this tray has a 3mm base and a 9mm top layer, by making the top in a single cut there is no snagging issue and I only have to align 2 layers together. All the names cut from 3mm and were glued onto the base afterwards to provide tipping points. These will go up in the shop in a few days time.
The market system in the game Puerto Rico takes a long time to set up, so what it really needed was a try to hold all the buildings in place that can be easily taken in and out of the box so I made one. Each space is capable of holding up to 4 buildings and has a wedge underneath each tile so that you can press down on one side and easily remove them. The remaining gap was dedicated to the bank as per the original tile board. It's all made from 3mm poplar and takes a bit of time to assemble so I think I'll be tweaking it again tonight but not bad for a first effort.