Paper Pizzaz 4

-

These 'Fold it swirls' are my favourite so far, the leaves lock down over each other so it doesn't pop up again and they look pretty good. (svg here)






Popular posts from this blog

Hilbert Fractal Curve Puzzle

-
Image
Boing Boing recently featured a puzzle made from a space filling curve, it looked pretty good so I took the opportunity to convert my space filling Hilbert curve into a similar puzzle. I'm thinking about listing this in the web store, it's a challenging puzzle because all the pieces look the same.
Read more

Wiring the Ruida Controller

-
Image
The RDC6442G controller from Ruida This is going to be quite an image heavy post describing the rewiring needed to convert between the Leetro controller and the Ruida controller. It is also pretty straight forward on the old Just Add Sharks laser cutters because all of the wires are clearly labelled. The controller was prepared in the previous step in order to make this conversion process as smooth as possible. The Leetro (Pad03) panel on the left and the Ruida panel on the right The view from inside the laser looking up at the control panel The control panel is an easy place to start, both panels have just a single cable that runs down to the controller, both panels are a very similar size, with the Ruida panel being slightly smaller underneath so it will fit in the hole left behind easily. The Pad03 panel clips into place so you'll need to reach up inside the machine to work the clips loose. The cable runs down the inside of the laser and is cable tied onto mounti...
Read more

Mimic Business Card Holder

-
Image
Northants Board Game convention is right around the corner and I'm exhibiting this year so I decided I needed a better business card holder to dish out my little business tchotchke. I found a file for a mimic box that I liked and modified it to come up with this little cutie. He's a very happy chappy, just be careful of your fingers when you're taking a card.  
Read more