Posts

Project #26 Engagement Ring Box

Image
In reverse order now, I actually made a prototype for the large wooden box  that in many ways is much more successful. This box still has a living hinge holding the lid on and the smaller scale of the item made it much easier to assemble. I flipped the box over and put an engagement ring it because I thought it was just the right size for the job. It's essentially a square box inside a rounded box but that gives quite a nice wall thickness to the box and a certain sense of style. The front and back sections connect with a big 'jigsaw' joint, slightly overkill for the small box but essential on the larger one. The lid is held shut with 3mm x 9mm diameter neodymiums they're strong enough to pull through the wood. It could easily be engraved, or inlaid or a million other things to smarten it up a bit which is why I'm sharing the files with you guys, let me know what you do with it. ( svg here ) 26 Projects / 30 Weeks    

Project #25 Large Wooden Box

Image
For LARP we required a large container with an 8"x 8"x 8" maximum volume, preferably with some engravings on the outside. I went all out for this one, designing a box using living hinges and having a nice amount of wall thickness. Ultimately I made a few silly mistakes and had to bodge a real hinge into the back for opening the lid but it's a really nice box and I hope that someone commissions a similar box so that I can make the tweaks and perfect the design. The prototype however is a really nice box which had it's tweaks so I'll post that up shortly. ( svg here ) 25 Projects/  30 Weeks

Teeny Hilbert Curve

Image
Following on from the teeny text  I wanted to see what kind of resolution I could get out of the laser. I chose the Hilbert curve as a nice little test pattern as it starts in one corner ends in another and has 1 single continuous line running across it. The first piece was straight off the drawing board and for whatever reason was 23mm wide. It cut perfectly except a slight blank patch at the start where the laser presumably was turning on The second attempt was shrunk to 15mm wide and again is clearly well defined. The final test piece was 10mm wide, each of the lines was cleanly etched into the material but the grain of the wood started to make it harder to see. I'm pretty impressed though and will be looking to do more things on a small scale shortly.

Large Lizards

Image
I was commissioned through Etsy to make some Escher Lizards but 10cm in size. I managed to squeeze 27 onto a sheet and they came out pretty well. The larger size feels nicer in the hand. I even relisted them on Etsy. They can be done plain or with Mahogany or Oak wood stain or with a colour wash of any other colour.

Teeny Text

Image
It's another LARP related cut of a group emblem on spruce wood dog tag stylee, which is why I haven't led with a whole item picture. Instead I wanted to show people the awesomeness that is the teeny tiny text of this item. I tried to etch the font because I thought that would produce a better image but it just wasn't readable, as a last ditch attempt I switched across to a low power cut, assuming that there would be insufficient step size to engrave such a small item. I was certainly wrong about that, the teeny tiny text here is testament to the awesomeness of laser cutting, I'll be looking to do more with this.

Dragon Tokens

Image
Another group emblem for LARP, this time I tried to add an interesting Red/Black paint effect to the wood before it was cut. The red dried quite a bit darker but you can still see signs of the effect on the token, it's a bit more interesting than plain red.

Laser Cut Leather

Image
I know leather can be laser cut, I've been asked to cut leather a good dozen times but the truth is that I don't have any leather and I don't know anything about leather which leaves me in a dubious position that I wouldn't know what to buy and how much to pay for it. So I finally found a compromise, somebody sent me some leather that they wanted cutting, I get the practice and the experience and I return the finished item no charge. And here are the results, I'm pleased and surprised how thick I could cut through, it's fairly stinky stuff though.